P5000HS - 1-5/8" x 3-1/4", 12 Gage, Round Holes
Unistrut's P5000HS has round holes on the back side for use with 1/2" threaded rod and fasteners (or smaller diameters with use of flat washers). These holes can eliminate the need for field drilling when installing a trapeze support, anchoring the channel to a surface, or for many other applications.
This channel is commonly used for trapeze supports, seismic bracing, and anchoring to floors, ceilings and walls. This is a great product for certain seismic bracing applications where slots are not allowed.
Product dimensions are 1 5/8" wide x 3 1/4" tall x 12 ga. thick; with round holes on one side. The holes are 9/16" in diameter and 1 7/8" on center. The hole diameters and spacing match Unistrut’s general fittings so that nearly all our fittings can be attached through these holes.
Our P5000HS is available in the following finishes: Pre-Galvanized (PG), Hot-Dip Galvanized (HG), Plain (PL), and Green (GR).
| Part No. | Length (ft) | Finish | Product Weight / Ft (lbs/ft) |
|---|---|---|---|
| P5000HS | 10 | PG | 3 |
| P5000HS | 20 | PG | 3 |
| P5000HS | 10 | HG | 3.18 |
| P5000HS | 20 | HG | 3.18 |
| P5000HS | 10 | GR | 3 |
| P5000HS | 20 | GR | 3 |
| P5000HS | 20 | PL | 3 |
| P5000HS | 10 | PL | 3 |
Beam Loading
| Beam Loading - P5000HS | ||||||
|---|---|---|---|---|---|---|
|
Span
(in) |
Max Allow. Uniform Load
(lbs) |
Deflection at Uniform Load
(in) |
Uniform Loading at Deflection | Lateral Bracing Reduction Factor | ||
|
Span/180
(lbs) |
Span/240
(lbs) |
Span/360
(lbs) |
||||
| 24 | 4,734 | 0.03 | 4,734 | 4,734 | 4,734 | 0.98 |
| 36 | 3,150 | 0.07 | 3,150 | 3,150 | 3,150 | 0.85 |
| 48 | 2,367 | 0.12 | 2,367 | 2,367 | 2,367 | 0.70 |
| 60 | 1,890 | 0.18 | 1,890 | 1,890 | 1,728 | 0.55 |
| 72 | 1,575 | 0.26 | 1,575 | 1,575 | 1,197 | 0.44 |
| 84 | 1,350 | 0.36 | 1,350 | 1,323 | 882 | 0.38 |
| 96 | 1,179 | 0.47 | 1,179 | 1,008 | 675 | 0.33 |
| 108 | 1,053 | 0.59 | 1053 | 801 | 531 | 0.30 |
| 120 | 945 | 0.73 | 864 | 648 | 432 | 0.28 |
| 144 | 792 | 1.06 | 603 | 450 | 297 | 0.24 |
| 168 | 675 | 1.43 | 441 | 333 | 216 | 0.22 |
| 192 | 594 | 1.88 | 333 | 252 | 171 | 0.21 |
| 216 | 522 | 2.35 | 270 | 198 | 135 | 0.19 |
| 240 | 477 | 2.95 | 216 | 162 | 108 | 0.18 |
| Note | Bearing load may govern capacity. | |||||
Column Loading
| Column Loading - P5000HS | |||||
|---|---|---|---|---|---|
|
Unbraced
Height (in) |
Allowable Load at Slot Face
(lbs) |
Max Column Load Applied at C.G. | |||
| K=0.65 (lbs) | K=0.80 (lbs) | K=1.0 (lbs) | K=1.2 (lbs) | ||
| 24 | 5,650 | 16,870 | 15,180 | 12,850 | 10,600 |
| 36 | 4,690 | 13,140 | 10,600 | 7,650 | 5,660 |
| 48 | 3,560 | 9,550 | 6,860 | 4,790 | 3,660 |
| 60 | 2,730 | 6,680 | 4,790 | 3,450 | 2,710 |
| 72 | 2,160 | 4,980 | 3,660 | 2,710 | 2,170 |
| 84 | 1,760 | 3,950 | 2,960 | 2,240 | 1,820 |
| 96 | 1,500 | 3,270 | 2,500 | 1,930 | 1,580 |
| 108 | 1,310 | 2,800 | 2,170 | 1,690 | 1,390 |
| 120 | 1,170 | 2,450 | 1,930 | 1,510 | KL/r>200 |
| 144 | 980 | 1,980 | 1,580 | KL/r>200 | KL/r>200 |
| 168 | 850 | 1,670 | 1,340 | KL/r>200 | KL/r>200 |
Elements of Section
| Elements of Section - P5000HS | ||
|---|---|---|
| Area of Section | 0.897 in2 (5.8 cm2) | |
| Axis 1-1 | Axix 2-2 | |
| Moment of Inertia (I) | 1.098 in4 (45.7 cm4) | 0.433 in4 (18 cm4) |
| Section Modulus (S) | 0.627 in3 (10.3 cm3) | 0.533 in3 (8.7 cm3) |
| Radius of Gyration (r) | 1.107 in (2.8 cm) | 0.695 in (1.8 cm) |
General Specifications
Standard Lengths:
- 10 feet: 10' or 10’ 1/8” (3.05m) ± 1/8" (3 mm)
- 20 feet: 20' or 20’ 3/8” (6.11m) ± 1/8" (3 mm)
Special Lengths:
- Available with a tolerance of ±1/8" (3 mm). Request quote.
Curved Channel:
- Many Unistrut channel sections can be supplied with a curve. Click here for our ordering form, specifications, and instructions.
Load Data:
- All beam and column load data pertains to carbon steel and stainless steel channels.
- Load tables apply only to UNISTRUT brand channel. Look for "UNISTRUT" on the product.
- Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
- Loads are based on 33 ksi steel cold formed to 42 ksi.
- Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
- Beam loads are based on a simple beam and are given as a total uniform load (W) in pounds. For proper calculation procedures, refer to our Beam Load Calculation Guide.
- For bearing loads, reference our Bearing Loads Page.
Materials & Finishes
Materials & Finishes - Standard:
- Pregalvanized (PG): Conforms to ASTM A653 SS GR 33, G90.
- Unistrut Defender (DF): Conforms to ASTM A1046 SS GR 33
- Hot Dip Galvanized (HG): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
- Perma-Green (GR): Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
- Perma-Gold (ZD): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
- Plain (PL): Conforms to ASTM A1011 SS GR 33
- Stainless Steel, Type 304 (SS): ASTM A240, Type 304 *
- Stainless Steel, Type 316 (ST): ASTM A240, Type 316 *
- Aluminum (EA): ASTM B221, Type 6063-T6 (Extruded) *
* These materials have different physical properties and performance characteristics. Please contact us for design support.