P3754 - Concrete Inserts (Heavy Duty)

Part No. Finish Product Weight / Piece (lbs)
P3754 HG 2.1

    Load Criteria








    General Specifications

    Specifications:

    • Closure Strip P3712P and a styrene bead end cap that fits inside the channel to inhibit concrete seepage are included.
    • Includes closure and end caps unless otherwise requested.
    • All nuts and fittings for the P3200 Series Concrete Insert will fit.

    Design Loads:

    • Design loads, where shown, are based on 3,000 PSI concrete, unless noted.
    • Safety factor = 3.0.
    • The recommended design load when used for curtain wall anchorage is 5,000 lbs and is based on use in average, good concrete. The design load includes 1/3 increase in load as permitted by AISI Specifications and Uniform Building Code when stresses are produced by wind or earthquake and other loads.
    • The recommended design load is based on using two 1/2" Channel Nuts at no less than 3" centerline and the concrete edge must be a minimum of 3".

    Materials & Finishes

    Materials & Finishes:

    • Hot Dip Galvanized (HG):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123 or A153