P3349 thru P3351 - Concrete Insert (3 in - 6 in)
| Part No. | Length (ft) | Finish | Product Weight / Piece (lbs) |
|---|---|---|---|
| P3349NC | 3" (76) | PG | 0.68 |
| P3349NC | 3" (76) | PL | 0.68 |
| P3349WC | 3" (76) | PG | 0.68 |
| P3349WC | 3" (76) | PL | 0.68 |
| P3350NC | 4" (102) | PG | 0.81 |
| P3350NC | 4" (102) | PL | 0.81 |
| P3350WC | 4" (102) | PG | 0.81 |
| P3350WC | 4" (102) | PL | 0.81 |
| P3351NC | 6" (152) | PG | 1.02 |
| P3351NC | 6" (152) | PL | 1.02 |
| P3351WC | 6" (152) | PG | 1.02 |
| P3351WC | 6" (152) | PL | 1.02 |
Design Loads
| Part Number | Insert Length in or ft (mm) |
Max. Allowable Point Load lbs (kN) |
Min. Spacing of Point Loads in (mm) |
Max. Allowable Uniform Load lbs (kN) |
Max. Allowable Uniform Load lbs/ft (kg/m) |
| P3349 | 3" (76.2) | 400 (1.78) | - | 400 (1.78) | - |
| P3350 | 4" (101.6) | 500 (2.22) | - |
500 (2.22) | - |
| P3351 | 5" (152.4) | 750 (3.34) | - |
750 (3.34) | - |
- Design loads are based on 3,000 PSI concrete, unless noted otherwise.
- Safety Factor = 3.0
Load Criteria
General Specifications
Specifications:
- Includes closure and end caps unless otherwise requested.
- P3380 end cap used with distance to first anchor is up to 2" (51 mm).
- P3703 end cap is used when end distance to first anchor is over 2" (51 mm).
- Nail or anchor inserts to forms every 16" (406.4 mm) to 24" (609.6 mm).
- Anchors are 8" (203.3 mm) on center.
Options:
- "NC" Suffix - No Closure Strip, with End Caps & Back Plates
- "WC" Suffix - With Closure Strip, End Caps & Back Plates
- "X" Suffix - No Closure Strip, no End Caps, with Back Plates
Materials & Finishes
Materials & Finishes - Standard:
- Pregalvanized (PG): Conforms to ASTM A653 SS GR 33, G90.
- Unistrut Defender (DF): Conforms to ASTM A1046 SS GR 33
- Hot Dip Galvanized (HG): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
- Perma-Green (GR): Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
- Perma-Gold (ZD): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
- Plain (PL): Conforms to ASTM A1011 SS GR 33
- Stainless Steel, Type 304 (SS): ASTM A240, Type 304 *
- Stainless Steel, Type 316 (ST): ASTM A240, Type 316 *
- Aluminum (EA): ASTM B221, Type 6063-T6 (Extruded) *
* These materials have different physical properties and performance characteristics. Please contact us for design support.