P3249 thru P3252 - Concrete Insert (3 in - 8 in)
| Part No. | Length (ft) | Finish | Product Weight / Piece (lbs) |
|---|---|---|---|
| P3249NC | 3" | PG | 0.85 |
| P3249NC | 3" | PL | 0.85 |
| P3249WC | 3" | PG | 0.85 |
| P3249WC | 3" | PL | 0.85 |
| P3250NC | 4" | PG | 1 |
| P3250NC | 4" | PL | 1 |
| P3250WC | 4" | PG | 1 |
| P3250WC | 4" | PL | 1 |
| P3251NC | 6" | PG | 1.3 |
| P3251NC | 6" | PL | 1.3 |
| P3251WC | 6" | PG | 1.3 |
| P3251WC | 6" | PL | 1.3 |
| P3252NC | 8" | PG | 1.59 |
| P3252NC | 8" | PL | 1.59 |
| P3252WC | 8" | PG | 1.59 |
| P3252WC | 8" | PL | 1.59 |
Design Loads
| Part Number | Insert Length in or ft (mm) |
Max. Allowable Point Load lbs (kN) |
Min. Spacing of Point Loads in (mm) |
Max. Allowable Uniform Load lbs (kN) |
Max. Allowable Uniform Load lbs/ft (kg/m) |
| P3249 | 3" (76.2) | 500 (2.22) | - | 500 (2.22) | - |
| P3250 | 4" (101.6) | 800 (3.56) | - |
800 (3.56) | - |
| P3251 | 5" (152.4) | 1,000 (4.45) | - |
1,000 (4.45) | - |
| P3252 | 8" (203.2) | 1,200 (5.34) | - |
1,200 (5.34) | - |
- Design loads are based on 3,000 PSI concrete, unless noted otherwise.
- Safety Factor = 3.0
Load Criteria
General Specifications
Specifications:
- Includes closure and end caps unless otherwise requested.
- P3280 end cap used with distance to first anchor is up to 2" (51 mm).
- P3704 end cap is used when end distance to first anchor is over 2" (51 mm).
- Nail or anchor inserts to forms every 16" (406.4 mm) to 24" (609.6 mm).
- Anchors are 8" (203.3 mm) on center.
Design Loads:
- Design loads, where shown, are based on 3,000 PSI concrete, unless noted.
- Safety factor = 3.0.
Options:
- "NC" Suffix - No Closure Strip, with End Caps & Back Plates
- "WC" Suffix - With Closure Strip, End Caps & Back Plates
- "X" Suffix - No Closure Strip, no End Caps, with Back Plates
Materials & Finishes
Materials & Finishes - Standard:
- Pregalvanized (PG): Conforms to ASTM A653 SS GR 33, G90.
- Unistrut Defender (DF): Conforms to ASTM A1046 SS GR 33
- Hot Dip Galvanized (HG): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
- Perma-Green (GR): Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
- Perma-Gold (ZD): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
- Plain (PL): Conforms to ASTM A1011 SS GR 33
- Stainless Steel, Type 304 (SS): ASTM A240, Type 304 *
- Stainless Steel, Type 316 (ST): ASTM A240, Type 316 *
- Aluminum (EA): ASTM B221, Type 6063-T6 (Extruded) *
* These materials have different physical properties and performance characteristics. Please contact us for design support.