P2500 thru P2503 - 24" to 30" Bracket (1-5/8" Series)
| Part No. | Nom. Pipe Size | A | B | Finish | Product Weight / Piece (lbs) |
|---|---|---|---|---|---|
| P2500L | 24" (610) | 24" (610) | 6-7/16" (164) | HG | 4.24 |
| P2500L | 24" (610) | 24" (610) | 6-7/16" (164) | GR | 4 |
| P2500R | 24" (610) | 24" (610) | 6-7/16" (164) | HG | 4.24 |
| P2500R | 24" (610) | 24" (610) | 6-7/16" (164) | GR | 4 |
| P2501L | 26" (660) | 26" (660) | 6-15/16" (176) | HG | 4.72 |
| P2501L | 26" (660) | 26" (660) | 6-15/16" (176) | GR | 4.45 |
| P2501R | 26" (660) | 26" (660) | 6-15/16" (176) | HG | 4.72 |
| P2501R | 26" (660) | 26" (660) | 6-15/16" (176) | GR | 4.45 |
| P2502L | 28" (711) | 28" (711) | 7-7/16" (189) | HG | 5.23 |
| P2502L | 28" (711) | 28" (711) | 7-7/16" (189) | GR | 4.93 |
| P2502R | 28" (711) | 28" (711) | 7-7/16" (189) | HG | 5.23 |
| P2502R | 28" (711) | 28" (711) | 7-7/16" (189) | GR | 4.93 |
| P2503L | 30" (762) | 30" (762) | 7-15/16" (202) | HG | 5.78 |
| P2503L | 30" (762) | 30" (762) | 7-15/16" (202) | GR | 5.45 |
| P2503R | 30" (762) | 30" (762) | 7-15/16" (202) | HG | 5.78 |
| P2503R | 30" (762) | 30" (762) | 7-15/16" (202) | GR | 5.45 |
Design Loads
Notes:
- Safety factor = 2.5 based on the ultimate strength of the connection.
General Specifications
Standard Dimensions (Unless Shown Otherwise on Drawing):
- Hole Diameter: 9/16" (14mm)
- Hole Spacing (From End): 13/16" (21mm)
- Hole Spacing (On-Center): 1 7/8" (48mm)
- Width: 1 5/8" (41mm)
- Thickness:
- 1/4" (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
- 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45
Note:
- When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.
Materials & Finishes
Materials & Finishes - Standard:
- Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
- Electrogalvanized (EG): Conforms to ASTM B633, Type III SC1
- Unistrut Defender (DF): Conforms to ASTM A1059
- Hot Dip Galvanized (HG): Conforms to ASTM A123 or A153
- Perma-Green (GR): Conforms to commercial standards for powder coating
- Perma-Gold (ZD): Conforms to ASTM B633, Type II SC1 or SC3
- Plain (PL): No finish
Materials & Finishes - Special Metals:
- Stainless Steel, Type 304 (SS): Conforms to ASTM A240 or A276, Type 304 *
- Stainless Steel, Type 316 (ST): Conforms to ASTM A240 or A276, Type 316 *
- Aluminum (AL): Conforms to ASTM B209, Type 1100F or 5052-H32 *
* These materials have different physical properties and performance characteristics. Please contact us for design support.