P2231A & P2232A - 6" - 12" Bracket (slot down) (1-5/8" Series)
| Part No. | Nom. Pipe Size | Finish | Product Weight / Piece (lbs) |
|---|---|---|---|
| P2231A | 6" | HG | 2.025 |
| P2231A | 6" | GR | 1.91 |
| P2232A | 12" | HG | 3.095 |
| P2232A | 12" | GR | 2.92 |
Design Loads
| Design Loads - P2231A thru P2232A | ||||
|---|---|---|---|---|
| Part Number | Length "A" in (mm) |
Vertical Channel Part Number | Vertical Channel Gauge |
Uniform Design Load lbs (kN) |
| P2231A |
6" (152.4) | P1000 | 12 | 1,600 (7.12) |
| P1100 | 14 | 1,200 (5.34) | ||
| P2000 | 16 | 800 (3.56) | ||
| P2232A | 12" (304.8) | P1000 | 12 | 800 (3.56) |
| P1100 | 14 | 600 (2.67) | ||
| P2000 | 16 | 400 (1.78) | ||
Notes:
- Design loads only apply to Unistrut brand products. Look for "UNISTRUT" on the part.
- Safety factor = 2.5 based on the ultimate strength of the connection.
General Specifications
Standard Dimensions (Unless Shown Otherwise on Drawing):
- Hole Diameter: 9/16" (14mm)
- Hole Spacing (From End): 13/16" (21mm)
- Hole Spacing (On-Center): 1 7/8" (48mm)
- Width: 1 5/8" (41mm)
- Thickness:
- 1/4" (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
- 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45
Note:
- When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.
Materials & Finishes
Materials & Finishes - Standard:
- Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
- Electrogalvanized (EG): Conforms to ASTM B633, Type III SC1
- Unistrut Defender (DF): Conforms to ASTM A1059
- Hot Dip Galvanized (HG): Conforms to ASTM A123 or A153
- Perma-Green (GR): Conforms to commercial standards for powder coating
- Perma-Gold (ZD): Conforms to ASTM B633, Type II SC1 or SC3
- Plain (PL): No finish
Materials & Finishes - Special Metals:
- Stainless Steel, Type 304 (SS): Conforms to ASTM A240 or A276, Type 304 *
- Stainless Steel, Type 316 (ST): Conforms to ASTM A240 or A276, Type 316 *
- Aluminum (AL): Conforms to ASTM B209, Type 1100F or 5052-H32 *
* These materials have different physical properties and performance characteristics. Please contact us for design support.