P2008 thru P2020

1. Design loads only apply to UNISTRUT brand products. Look for "UNISTRUT" on the part.
2. Design loads are based on static testing with a safety factor = 5 based on ultimate strength of connection.
3. Appropriate Unistrut Bolt and Channel Nut required for connection to strut.

Pipe & Conduit Reference Data

• Pipe Spacing Table: (3/4" to 2-1/2")
• Pipe Spacing Table: (3" to 12")
• Channel Selection for Sch. 10 Trapeze
• Channel Selection for Sch. 40 Trapeze
• Pipe Reference Data: (EMT, Copper Tube, IMC)
• Pipe Reference Data: (Rigid Conduit, PVC)
• Schedule Steel Pipe Data

Installation:

• Torque:

Note: When tightening 1/4" screws used with a two piece pipe clamp, a torque of 5 ft-lbs (60 in-lbs) should be used.

Material:

• The steel meets or exceeds the physical properties of ASTM A1011 GR 33, except with SS, ST & AL finishes.

• Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
• Unistrut Defender (DF):  Conforms to ASTM A1059
• Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
• Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1 or SC3
• Everdur (E EG): TBD
• Stainless Steel, Type 304 (SS):  ASTM A240, Type 304 *
• Stainless Steel, Type 316 (ST):  ASTM A240, Type 316 *
• Aluminum (AL): TBD

* These materials have different physical properties and performance characteristics. Please contact us for design support.