P1204 thru P1208 - Wall Ladder Bracket (1-5/8" Series)
| Part No. | A | B | Finish | Product Weight / Piece (lbs) |
|---|---|---|---|---|
| P1204 | 2-3/8" (60) | 6"(152) | HG | 1.198 |
| P1204 | 2-3/8" (60) | 6"(152) | GR | 1.13 |
| P1204 | 2-3/8" (60) | 6"(152) | SS | 1.13 |
| P1205 | 4-3/8" (111) | 8" (203) | EG | 1.64 |
| P1205 | 4-3/8" (111) | 8" (203) | HG | 1.738 |
| P1205 | 4-3/8" (111) | 8" (203) | GR | 1.64 |
| P1205 | 4-3/8" (111) | 8" (203) | SS | 1.64 |
| P1206 | 6-3/8" (162) | 10 (254) | EG | 2.16 |
| P1206 | 6-3/8" (162) | 10 (254) | HG | 2.29 |
| P1206 | 6-3/8" (162) | 10 (254) | GR | 2.16 |
| P1207 | 8-3/8" (213) | 12 (305) | HG | 2.83 |
| P1207 | 8-3/8" (213) | 12 (305) | GR | 2.67 |
| P1208 | 10-3/8" (264) | 14 (356) | HG | 3.371 |
| P1208 | 10-3/8" (264) | 14 (356) | GR | 3.18 |
Materials & Finishes - Fittings
Materials & Finishes - Standard:
- Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
- Electrogalvanized (EG): Conforms to ASTM B633, Type III SC1
- Unistrut Defender (DF): Conforms to ASTM A1059
- Hot Dip Galvanized (HG): Conforms to ASTM A123 or A153
- Perma-Green (GR): Conforms to commercial standards for powder coating
- Perma-Gold (ZD): Conforms to ASTM B633, Type II SC1 or SC3
- Plain (PL): No finish
Materials & Finishes - Special Metals:
- Stainless Steel, Type 304 (SS): Conforms to ASTM A240 or A276, Type 304 *
- Stainless Steel, Type 316 (ST): Conforms to ASTM A240 or A276, Type 316 *
- Aluminum (AL): Conforms to ASTM B209, Type 1100F or 5052-H32 *
* These materials have different physical properties and performance characteristics. Please contact us for design support.
General Specifications - Fittings
Standard Dimensions (Unless Shown Otherwise on Drawing):
- Hole Diameter: 9/16" (14mm)
- Hole Spacing (From End): 13/16" (21mm)
- Hole Spacing (On-Center): 1 7/8" (48mm)
- Width: 1 5/8" (41mm)
- Thickness:
- 1/4" (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
- 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45
Note:
- When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.
Standard Dimensions
Standard Dimensions:
- Hole Diameter: 9/16" (14mm)
- Hole Spacing (From End): 13/16" (21mm)
- Hole Spacing (On Center): 1-7/8" (48mm)
- Width: 1-5/8" (41mm)
- Thickness: 1/4" (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
- 0.220" (5.6mm) with steel meeting or exceeding
ASTM A1011 HSLAS GR 45
- 0.220" (5.6mm) with steel meeting or exceeding
Note:
- When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.