P1130, P1131 - 2 hole & 2 slot, 90° Fitting (1-5/8" Series)

P1130-No-Dimensions.png
Part No. Nom. Pipe Size A B Finish Product Weight / Piece (lbs)
P1130 6-5/8" 6-5/8" (168) 4 (102) EG 1.9
P1130 6-5/8" 6-5/8" (168) 4 (102) HG 2.014
P1130 6-5/8" 6-5/8" (168) 4 (102) GR 1.9
P1131 8-5/8" 8-5/8" (219) 6"(152) EG 2.42
P1131 8-5/8" 8-5/8" (219) 6"(152) HG 2.565
P1131 8-5/8" 8-5/8" (219) 6"(152) GR 2.42
P1131 8-5/8" 8-5/8" (219) 6"(152) ZD 2.42
P1131 8-5/8" 8-5/8" (219) 6"(152) SS 2.42

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes - Standard:

    • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
    • Unistrut Defender (DF):  Conforms to ASTM A1059
    • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
    • Perma-Green (GR):  Conforms to commercial standards for powder coating
    • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1 or SC3
    • Plain (PL):  No finish 

    Materials & Finishes - Special Metals:

    • Stainless Steel, Type 304 (SS):  Conforms to ASTM A240 or A276, Type 304 *
    • Stainless Steel, Type 316 (ST):  Conforms to ASTM A240 or A276, Type 316 *
    • Aluminum (AL):  Conforms to ASTM B209, Type 1100F or 5052-H32 *

    * These materials have different physical properties and performance characteristics. Please contact us for design support.